|
Into The Wilderness
Trading
YES
- We ship w o
r l d
w i d
e - contact us.
International orders must be paid by paypal Linkert Float Bowl Parts A valid resale license or Tax ID # in the motorcycle industry is required to be on file to order from this site. We no longer sell brass or cork floats. They do not hold up to ethanol, nor do the imported rubber tip needle & seat sets. Indian used both 7/16x27 straight threads and 1/8 NPT tapered threads on their Linkert needle & seat fuel line inlet. Be sure which one you need BEFORE ordering Linkert needle & seats or bowl sets for Indian.  |
||
 Harley OEM # 27382-33 Needle & seat assembly Big twin 1933-1965 Steel needle . Dual gas ports. USA made $ 19.00 each 5 / $ 90.00 25 / $ 437.50 |
 Indian OEM # 102716 Needle & seat assembly Steel needle . Dual gas ports. USA made $ 19.00 each 5 / $ 90.00 25 / $ 437.50 |
Harley OEM # 27382-52 Needle & seat assembly M53 & M53A1 ONLY. Has recess for fuel line Steel needle . Dual gas ports. USA made $ 20.00 each 5 / $ 95.00 |
 OEM 27382-61 (also replaces 27382-57 ) Correct needle and seat for all Linkert DC carbs with steel needle as original. Dual gas ports for better fuel flow as that was a problem on many Linkert DC carbs. May also be used with Linkert M-series carbs when connecting directly to fuel line without having to use an adapter. $ 19.00 each 5 / $ 90.00 25 / $ 437.50 |
 Our 27382-61 needle & seat shown in both styles of Linkert bowls. M-series on the left and DC model on the right. |
|
 NEW ITEM Small Base Needle & Seat Harley #1284-31 & 1273-31 Indian OEM # 100953 Small base needle & seat. Steel needle Fits all 1930's Indian & Harley Schebler short & long nose bowls using the tin cover. USA made $ 20.00 each 5 / $ 95.00 |
 NEW ITEM Schebler STAINLESS STEEL Float Valve Needle Harley # 1198-11 Indian # S922, N1040 Schebler # DL11 Fits all Schebler HX & DLX carburetors using this type of needle USA made $ 16.00 10 / 150.00 25 2 |
|
 Brass Seat 1198-11KIT $ 29.00 5 / $ 135.00 20 / 500.00 |
NEW! Thread & seat repair set for Schebler HX & DLX brass bowls. Includes a new STAINLESS needle, new brass seat, and instructions. Simply cut off bad threads,file, drill, tap, thread in new seat. No other changes. Works with original float lever Yes, they CAN be fixed. Will work on H, G, and DLX brass bowls. See photo to right Comes with photo instructions The correct tap & drill bit are available on our tools page if needed. USA made |
 Nickel Seat 1198-11KITN $ 31.00 5 / $ 140.00 20 / 525.00 |
 Schebler # SC29 Harley # 0593, # 1193-09 New hi-tech nitrophyl float for the Schebler HX carbs. Made of the same material as used in the auto industry today. Correct screw included Back in stock Handmade in the USA from USA nitrophyl ! $ 60.00 |
 New DL13 Float lever needle retaining nut only for all Schebler brass bowl DL12 float levers Schebler # SC70 Schebler # DL13 Harley # 1199-16 $ 5.00 10 / $ 45.00 |
 New DL12KIT Includes float lever, needle retaining nut & stainless needle for all Schebler brass DLX bowls and most Schebler HX brass bowl Schebler # DL12 ( 1195-16) Schebler #DL13 ( 1199-16) Schebler #DL11 ( 1198-11) $ 72.00 |
| NEW! 1198-KIT NOW available with 1/8 NPT threads so you can hard line your antique motorcycle fuel line without soldering ! 1/8 NPT fittings are available at your local hardware store. Thread & seat repair set for Schebler HX & DLX brass bowls. Includes a new STAINLESS needle, new brass seat, and instructions. Simply cut off bad threads,file, drill, tap, thread in new seat. No other changes. Works with original float lever Yes, they CAN be fixed. Will work on AMX, HX, and DLX brass bowls. See photo to right Comes with photo instructions The correct tap & drill bit are available on our tools page if needed. USA made |
 1/8NPT-Elbow 1/8 NPT elbow to 5/16" compression. The easy way to hard plumb your fuel line without soldering. Fits the seat listed to the right and also fits our 102716 Linkert needle & seat. USA Made of course $ 8.00 |
1198-11NPT $ 29.00 5 / $ 135.00 20 / 500.00 |
 NEW OEM # 27376-28P Carburetor Bowl Nut Seal Replaces 27376-28 Crush Ring PTFE Gasket (Indian 102423) All DLX & Linkert M models 1928-65 USA made Less pressure to seal, so ideal for those fragile pot metal carbs. $ 3.25 Each 10 / $ 30.000 |
 Race Fuel Elbow Fits all 7/16x27 inlet threads. NOT for 1/8 NPT threads $ 20.00 5 + -$18.00 Each |
Harley OEM # 1284-26 Needle & Seat w/ Stainless needle 1924-1930 Harley Single & all other G model carbs- GX1,2,3,4,5,6,7,8,9,11 $ 29.00 5 / $ 135.00 20 / 500.00 |
 Fuel Line Compression Nut, 1/4" # A21180-B Fuel Line 1909-1965 all models This is custom made to fit our 7/16x27 straight needle & seat threads. Use with part # B21710. Can also use with standard compression ring on our 27382-52 needle & seat. USA made $ 6.50 10 / 60.00 O/S |
 Fuel Line Cone, 1/4" # B21710 For use with # A21180-B Fuel Line 1909-1965 all models This is the solder in cone USA made $ 6.50 10 / 60.00 |
 Fuel Line Compression Nut, 1/4" # A21180-B CAD PLATE Fuel Line 1936-1942 all models This is custom made to fit our 7/16x27 straight needle & seat threads. Use with part # B21710. Can also use with standard compression ring on our 27382-52 needle & seat. USA made $ 7.50 10 /$ 70.00 |
| Shown
below are examples of our nut & cone setup on
various carbs from 1915 to 1965 Build your own hard lines. |
||
 |
 |
 |
 |
 |
 |
 Float Screw OEM # 1271-33 Indian # 102448 Schebler DL8 Screw and nut For mounting cork & foam floats to float lever 1933 to 1965 Linkert/Beck/Schebler No Modifications required with this one. USA made |
 They Are Back !!! Billet Float lever Our 1 Piece Machined Lever - Machined from solid brass OEM # 27381-501P All Linkert 1930-65 USA Made These are the best, period, for those that want a top quality alternative to our imported levers. This is the only float lever we now offer. $ 30.00 |
 Float Bowl, Type 2 This bowl DOES NOT have a drain plug 2 pivot cap style OEM # 27371-36T2 Imported / exc. quality O/S $ 85.00 |
| Bowl, OHV, Type 1 This bowl DOES have a drain plug 2 pivot cap style OEM # 27371-36T1 Imported / exc. quality O/S $ 85.00 |
  Float Bowl, Type 1 with drain OEM # 1267-24 Imported / exc. quality Only 10 Available $ 100.00 |
 # 27380-33 (Indian 102477) New hi-tech foam float for all Linkert M series carbs and some Scheblers. Impervious to all of today's fuels.Made of the same material as used in the auto industry today. Trouble free - period. And still weighs the same as the original. The finest on the market. USA made Correct screw set included $ 36.00 5 / $ 165.00 10 / $ 310.00 20 / $ 550.00 |
 Sometimes only the best will do.This set includes our 1 Piece Machined Float Lever - MACHINED from solid brass, NOT cast ! Includes our STRAIGHT THREAD needle and seat with stainless steel needle, a Rubber Ducky float with our correct screw set, our float pivot pin set, and our new PTFE low torque bowl nut seal. All Linkert carbs using straight thread needle & seat, 1930-65. USA Made Float Kit ST $ 90.00 |
Sometimes only the best will do.This set includes our 1 Piece Machined Float Lever - MACHINED from solid brass, NOT cast ! Includes our 1/8 NPT TAPERED THREAD needle and seat with stainless steel needle, a Rubber Ducky float with our correct screw set, our float pivot pin set, and our our new PTFE low torque bowl nut seal. All Linkert carbs using tapered thread needle 7 seat USA Made Float Kit NPT $ 90.00 |
 Schebler DLX Float # 1271-24 Handmade nitrophyl float for the Schebler DLX carbs Made of the same material as used in the auto industry today. Correct screw included USA $ 75.00 BACK IN STOCK !! |
   # DL14N Nickel Plated Schebler Bowl Cap for Brass Bowls Fits all Schebler DLX bowls and most HX brass bowls with the exception of first few small cap bowls Includes o-ring seal - far better than original. USA made $ 11.00 |
   # DL14 Schebler Bowl Cap for Brass Bowls Fits all Schebler DLX bowls and most HX brass bowls with the exception of first few small cap bowls. Includes o-ring seal - far better than original. USA made $ 10.00 |
 Bowl #1B This bowl DOES NOT have a drain OHV Bowl Assembly 7/16x27 straight inlet threads New side valve bowl assembly Rubber Ducky float, needle & seat with steel tip needle, 1 piece float lever, pin set, float screw set, bowl gasket, crush ring. All set, just bolt on. $ OUT OF STOCK |
Bowl #1 This bowl DOES have a drain OHV Bowl Assembly 7/16x27 straight inlet threads New side valve bowl assembly Rubber Ducky float, needle & seat with steel tip needle, 1 piece float lever, pin set, float screw set, bowl gasket, crush ring. All set, just bolt on. $ OUT OF STOCK |
 Bowl assembly #2 SV Bowl Assembly w/drain 7/16x27 straight inlet threads Harley & Indian New side valve bowl assembly Rubber Ducky float, needle & seat with steel tip needle,1 piece float lever, pin set, float screw set, bowl gasket, crush ring. All set, just bolt on. $ OUT OF STOCK |
Bowl #3 SV Bowl Assembly w/drain 1/8 NPT tapered inlet threads Indian only New side valve bowl assembly Rubber Ducky float, needle & seat with steel tip needle, 1 piece float lever, pin set, float screw set, bowl gasket, crush ring. All set, just bolt on. $ OUT OF STOCK |
  NEW ITEM Flex Line Hose Barb & Nut w/ CAD nut Found a few of these Panhead hose barbs at an old Harley dealer years ago. Sold them off quickly and have now decided to produce them. You can use a rubber line with these and still use your stock fuel filter. These include a new 62361-50 fuel line nut that fits the #62250-50 strainer and these will also fit 1950-1965 FL, FLH tanks. $ 22.00 5 / $ 100.00 |
  NEW ITEM Flex Line Hose Barb & Nut w/ Brass Nut Found a few of these Panhead hose barbs at an old Harley dealer years ago. Sold them off quickly and have now decided to produce them. You can use a rubber line with these and still use your stock fuel filter. These include a new 62361-50 fuel line nut that fits the #62250-50 strainer and these will also fit 1950-1965 FL, FLH tanks. $ 21.00 5 / $ 90.00 |
 Gas line to fuel filter flare nut . Harley # 62361-50 1950-1965 Fl, FLH Uses # 62360-50 Seal USA made $ 4.25 10 / $ 40.00 |
 CAD PLATE Float Bowl Valve Cap OEM # 27390-33 ( 1275-33 ) (Indian 102425) USA made $ 8.00 10 / $ 75.00 |
 Bowl Drain Plug CAD PLATE OEM # 27377-39 ( Indian 102422) All Linkert models with drain plug in float bowl USA made $ 6.00 10 / $ 55.00 |
 NEW N1064 Schebler HX Small ( 9/16 " I.D. ) Bowl Nut Flat Copper Gasket. These are for those small stem HX carburetors $ 7.50 / 5 |
 Float Pivot Pin w/ Single Cap OEM # 27383-11SC (1196-11) Indian 102451 & 102452 Indian 102715 & 102452 Schebler DL9 & DL10 All Schebler / Linkert 1916-65 USA made $ 6.25 10 / $ 60.00 |
 Bowl Drain Plug OEM # 27377-39 ( Indian 102422) All Linkert models with drain plug in float bowl USA made $ 5.50 10 / $ 50.00 |
 Pivot Pin Cap / Bowl Drain Plug , OVERSIZE OEM # 27377-39OS ( Indian 102419OS) Seal with locktite or similar. Head diameter is same as stock. All Linkert models. Simple fix for stripped drain plug or float lever cap threads. Originals are 1/4x32 threads, while our repair plugs are 5/16x24. All else is the same. Save those expensive bowls. Taps are on our tool page. USA made $ 5.75 10 / $ 55.00 |
 OEM # 27383-11DC (1196-11) Indian 102451 & 102452 Indian 102715 & 102452 Schebler DL9 & DL10 All Schebler / Linkert 1916-65 USA made $ 9.50 10 / $ 90.00 |
 # 100953W Fibre washer, float valve . Small base needle & seat. If you have a bowl with the tin cover, this is the gasket for that small thread needle & seat USA made $ 1.50 Each $ 13.00 / 10 |
 Carburetor Bowl Locknut Set Cad Plated OEM # 27375-29 All models 1930-65 USA made $ 12.95 5 / 60.00 |
 # 27376-52 Float bowl gasket . All offset SV bowls as used on Most Schebler All Linkert 1" Most Linkert 1 1/4" 1952-1956 Linkert 1 1/2"Carbs used on K,KH,KHK USA made $ 2.75 Each 10 / $ 25.00 |
# 27391-36 ( 1276-36 ) Float bowl gasket . Used on all "inline" bowls as used on Linkert 1 1/2" Carbs. USA made $ 2.75 Each 10 / 25.00 |
 Carburetor Bowl Locknut Crush Gasket OEM # 27376-28 (Indian 102423) All models 1928-65 USA made $ 1.75 Each 10 / $ 16.00 25 / $ 37.50 |
 NEW # 1276-32 Bowl Gasket for all Schebler Short Nose tin top bowl covers USA Made $ 2.50 10 / $ 22.50 25 / $ 50.00 |
 NEW # 1276-30 Bowl Gasket for all Schebler Long Nose tin top bowl covers USA Made $ 2.50 10 / $ 22.50 25 / $ 50.00 |
 Float Bowl Valve Cap OEM # 27390-33 ( 1275-33 ) (Indian 102425) COPPER USA made $ 4.00 10 / 37.50 |
 Bowl Drain Plug Gasket OEM# 27330-52 Indian 102423 VERY tough little item to find separate. These fit the drain plugs on all float bowls using a drain plug. We also use them on the imported reproduction float pivot pins. This saves having to rework the pivot bolt and float lever. USA made 10 / $ 17.00 |
# 27402-33 ( 1285-33 ) (Indian 102454) Gasket, float valve . 1933USA Made $ 1.50 Each $ 13.00 / 10  # 27402-33P ( 1285-33 ) (Indian 102454) PTFE gasket, float valve . 1933-1965 Linkert Carbs. USA made $ 3 .00 10 / $ 27.50 |
 Universal Fuel Strainer W/Screen OEM# 2212-1 Hook to gas tanks with 1/4" neoprene fuel line Zinc USA made $ 59.00 |
 Body Pins, Float Bowl Alignment #27318-41 USA Made $ 4.00 Pair |
 Fuel Strainer W/Screen OEM# 3623-32 1932-38 Big Twin Nickel USA made $ 59.00 |
 Fuel Strainer W/Screen OEM# 3623-39 1939-41 Big Twin Zinc USA made $ 45.00 |
 Fuel Strainer W/Screen OEM# 62250-50 1950-65 Big Twin Zinc USA made $ 59.00 |
 Fuel Strainer W/Screen OEM# 62250-41 1942-49 Big Twin Zinc USA made $ 59.00 |
 Screen for Fuel Strainer OEM# 3613-39 1939-41 USA made $ 4.50 |
 Gasket for Fuel Strainer OEM# 62270-32 All USA made 2 required per strainer 10 Corks /$ 14.00 15 Corks / $ 31.25 |
 Screen for Fuel Strainer OEM# 62265-32 All USA made $ 16.00 |
 Gas Line Seal OEM# 62360-50 1950-1965 Fl, FLH USA made 2.00 Each 10 / $ 15.00 |
 Gas line to fuel filter flare nut & seal. Harley # 62361-50 1950-1965 Fl, FLH CAD PLATE w/ Seal Uses # 62360-50 Seal Fits filter # 62250-50 USA made $ 6.00 Each |
Gas line to fuel filter flare nut & seal. Harley # 62361-50 1950-1965 Fl, FLH Uses # 62360-50 Seal Fits filter # 62250-50 USA made $ 5.00 Each |
 Gas line nut & seal set. 1950-1965 Fl, FLH 2 - Harley # 62361-50 nut 2- Harley # 62360-50 Seal Fits filter # 62250-50 USA made $ 9.00 Set |